The Chaimberlain / MyQ situation is terrible. I strongly recommend avoiding them all together.
I recently installed a Chaimberlain garage door opener in a location that required three buttons inside the garage. They limit the buttons in software, so that each garage door opener can have only two at any given time!
After some tinkering, I discovered that the Chaimberlain buttons transmit their signal wirelessly these days, even when "wired" to the garage door opener... the wires only provide power. So...
I worked around the problem by placing a dab of solder on one of their security+ 3.0 buttons so that it is always "pressed." Then I wired up the three old school garage door momentary switches to send power to it. When pressed, they power up the Chaimberlain button, which then sends a wireless signal to open the door.
show comments
AceJohnny2
The Apple App Store Review Guidelines 4.5.4 [1] have this to say:
> Push Notifications must not be required for the app to function, and should not be used to send sensitive personal or confidential information. Push Notifications should not be used for promotions or direct marketing purposes unless customers have explicitly opted in to receive them via consent language displayed in your app’s UI, and you provide a method in your app for a user to opt out from receiving such messages. Abuse of these services may result in revocation of your privileges.
I am frustrated that Apple isn't using their gatekeeping powers for good. I wonder if users can file a complaint.
You can also follow "Report A Problem" link at the bottom of the App Store's page for the app.
show comments
wallst07
Apps for devices that I purchased that show ads is probably one of my biggeset tech pet peeves.
I will sell/replace/throw every device if I see a ad in the ecosystem. Almost every IOT manufacturer does this crap so it gets more difficult. Moving the device to Home Assistant helps a little.
Ecobee you're next, and I hope you go down in flames having such crap software.
show comments
superultra
It’s super cool this person did this but even with AI, it’s a super power a normal user can’t pull off.
The notification marketing spam is really bad right now. I can literally turn off every marketing toggle in the Uber app (buried as it is), save it, then swipe out of those settings, then back in, and the notifications are all enabled again. Same goes for a lot of other apps, like the Dominos pizza app.
It’s gotten to the point where I just install the app, use it to order a pizza or a ride, the. uninstall the offending app (though sometimes I still get ghost notifications!)
But for apps like those for garage doors, that’s not a viable strategy.
I know why these notifications happen. The open rate ranges from 5-20% (though up to half of these can be accidental, but at least you got them back into the app, right).
But it really feels like an intrusion on the iOS and Android in ways that can compromise usage of the phone. It seems like at least Apple used to care about this and maintain UX standards but it seems like that has gone out the window.
For people who can’t jury rig a solution to their garage door opener, what can they do?
show comments
teekert
Philips (Signify) Hue is also horrible. You open the app, want to switch on a lamp, bam "Buy these new lamps for only 250 eur". Or "You need an account", which I don't need btw, everything I paid for works thank you. When I first started I just saw my rooms listed, now the top 2 tiles are "You need an account for "protection"" and then another one "Hue Secure: Help secure your house!". You can't remove these, you have to scroll down (more) to reach the intended goal for opening the app. w.t.f. Do you know how much I have paid them already?
I am of the persuasion that a smart home should never require whipping out your phone, but I have not been able to brush away all occurrences yet. But the Hue app always motivates me to either do things via Home Assistant (including just coupling the bulb directly using ZigBee) or get a switch ASAP.
Yes Signify (former Philips), you got an ad in my face, congrats, but you also got me super annoyed and I'll be on the lookout for alternatives.
show comments
gbdubs
One of the the ecosystem providers (Apply/Google/Amazon) should differentiate themselves by offering a certification level for their ecosystem that an IoT device:
- does not have a subscription fee
- does not sell data
- does not have ads or remarket
- follows basic cyber security hygiene
- is simple to set up (thinking of my parents)
- interacts purely through standard protocols
I have long delayed wiring my home with IoT devices, but would be interested in doing so if I could have some basic assurances about the experience of using it being pleasant and safe. Almost everybody that I know who has invested heavily in IoT has had to treat it like a side project to avoid the various pitfalls.
show comments
dj68k
Chalk me up to another happy user of Ratgdo. I got one of the older ESP8266-based ones whose Homekit firmware has been in "maintenance mode" by the developer due to its board having limited RAM and processing power to do the things they're doing with the current boards. That was a bummer to find out since I'd had the thing for less than a year and I was using the "dry contact" system: manually wired magnetic switches on the door to tell the board whether the door is up, down, or in a state between (opening or closing). It's a very, very old garage door opener.
Since the code was put in a "best-effort basis" for future updates, it's gone from version 2.2 to 2.2.6 with numerous fixes. Most notable was software-configurable "debounce" functionality which finally solved my problem with the door tripping the magnetic reed switches several times quickly when the door comes to a stop and confusing the board about its current up/down status.
I bring it up because I have tremendous enthusiasm for people who take an idea, a cheap microcontroller, and put together a solution for people who prefer to stick with older, simple appliances but still want some sort of smart functionality. People who "make cool stuff and put it on the internet." That the creator disclosed that he's putting his focus on the newer boards and will maintain/fix issues with the older ones on a "best-effort" and then actually does it... it's fantastic. Because of this continued support and fixes, I can't recommend Ratgdo boards enough.
show comments
100percentjake
For those curious, the apparent character-spam "RATGDO" is actually an acronym for Rage Against The Garage Door Opener.
modeless
When we rented our house the garage door opener was broken. The landlord sent a guy who was completely incompetent, gave up after five minutes and said we needed to buy a new one. The landlord would pay for it, but I knew that a new one would come with this MyQ scam and also not work with Homelink (car integration) which would be a huge downgrade. So I fixed it myself rather than get a free new one.
Someone should start a business ripping this crap out of garage door openers and replacing it with something sensible.
variety8675
Chamberlain made a new protocol that breaks the ability to do this with their new openers. They’ll get away with it too because there’s not many options for garage door openers and most people just buy whatever the contractor installs
show comments
chang1
Feit Electric and Arlo have also started pushing ads, probably within the past few months. Before there were zero ads... for years.
Technically it is against app store review guidelines to use push notifications for ads, unless the user has specifically opted in. I'm guessing it's difficult to catch during app review, or reviewers don't care.
> 4.5.4 Push Notifications must not be required for the app to function, and should not be used to send sensitive personal or confidential information. Push Notifications should not be used for promotions or direct marketing purposes unless customers have explicitly opted in to receive them via consent language displayed in your app’s UI, and you provide a method in your app for a user to opt out from receiving such messages. Abuse of these services may result in revocation of your privileges.
There is definitely no way to opt-in our opt-out in Feit or Arlo. My guess is the same with all these other apps.
stickfigure
If you want something more plug-and-play than the Ratgo, Tailwind is ~$120 and integrates with Google Home / Alexa.
I bought a house that came with a Chamberlain garage door opener. At $20 I figured I would try the MyQ device to see if it's as bad as people say. It is that bad.
I bought the Tailwind device and it is exactly what I wanted. I can tell Google to open/close the door. My only complaint is that Google makes me tell it a code to open, but you can put it in one voice prompt "hey google open the garage door with code NNNN".
show comments
jeroenpe
I used a 10 dollar sonoff wifi relay, soldered a zener to it to power it from 5V and cut the Live tracé so it can be used as a dry contact relay.
It just need to give a short pulse to start and open/close the door.
And to read out the door state I added a LDR circuit on the GPIO that is attached to the motor LED.
Has been working very well last three years using HA. no need for any of that expensive cloud connected hardware.
show comments
Aboutplants
I love my 25 year old, completely dumb garage door opener. We have a button in the cars and a keypad on the outside.
Plus, it’s so loud that if it were to ever open during the middle of the night, it’s a wonderful security alarm.
brynnb
I had a chip on my shoulder with something similar recently - using the Nanoleaf app to pair and control my "holiday string lights". I worked with Astra for a bit and got a script working to pair it to my Home Assistant entirely from my computer. No nanoleaf app, no apple Home app. And now I can also program it entirely from Home Assistant, too. As far as I can tell this didn't previously exist as an option for these.
I never (and would never) hook up myQ to my network, even my IOT VLAN. Immediately upon getting new garage door motors I installed ratgdo devices and monitor it via HomeAssistant and do get push notifications to my phone if a garage door is opened between certain times. Works perfectly…
HOWEVER, this didn’t prevent me from buying Chamberlain garage door motor and thus they likely don’t give a crap and won’t stop making horrifically stupid hostile consumer decisions. There really aren’t any good options (atleast in USA).
pastor_williams
I love that ratgdo stands for "rage against the garage door opener". I bought a pair for my own garage because I wanted home assistant integration and the native garage door app disallowed that. I feel like an element of spite is in there as well. I've already paid for the machine, if you hamstring my use of it I will do what I can to cut you out of my life.
lukeschlather
We need to expand the CAN SPAM act to cover app notifications. Really for something like a garage door opener there should be class-action lawsuit options getting injunctions against this sort of behavior. Even including ads in the app seems inappropriate.
Of course the flipside is that if your thing depends on an app you need ongoing maintenance, but if you've got an advertising-riddled app spamming notifications it seems like the prophylactic is indistinguishable from the disease it prevents.
MatekCopatek
We say this about many things in tech, but IoT really seems like an area that's long overdue for some kind of open protocol standardization. The device makers can build their services on top of it and run whatever business model they want, but they should at least be forced to give us an escape hatch.
show comments
benmorris
It wouldn't bother me one bit if apple/google banned advertisements in notifications period.
show comments
ryandrake
Pro Tip: you don’t need to buy one of the very expensive official ratgdo devices, if you are adventurous and can solder. The software is free and for a few bucks and a little time in KiCad you can build yourself a PCB, solder on the ESP32 and some electronics, and you’re off and running.
show comments
qazxcvbnmlp
I want to feed all my notifications through a jev like model with a prompt I control to determine if they are shown or not. Not rely on the out developer to behave, just filter if spam then ignore.
blantonl
There's a term for this. It's called "enshittification," and it's a cancer on our technological society.
I've never understood how technologists, product managers, and marketing people can sit in the same conference room and collectively decide, "Hey, let's start sending unsolicited marketing push notifications to our users, and while we're at it, we can make another $1,000 a month by stuffing Google Ads into the app."
And then everyone around the table nods their heads and says, "Great idea, let's do it!"
If I were in that room, I'd be throwing chairs. I'd be so vehemently opposed to this kind of garbage that the meeting would come to a screeching halt.
I genuinely cannot comprehend the decision-making process that leads an entire room of supposedly intelligent people to agree that deliberately degrading the user experience for a few extra dollars is a good business decision. These are not freemium products - these customers paid for these products!!
show comments
Intrepidatious
I have the dreaded MyQ because my new Honda didn't come with Homelink buttons and they make you tie into MyQ to access the opener via CarPlay. If any of this has a CarPlay solution, I'm in.
show comments
wingspar
I went with a Meross MSG100hk garage door interface.
It works with HomeKit and I added a HomeKit automation to turn a light on/off based on door open status.
torginus
Its weird manufacturers even try this - I'd bet a significant amount of money that this fancy garage door opener was marketed as a premium solution - and you couldn't just replace the motor and endstop sensors, you had to replace everything.
Meanwhile there are Zigbee solutions you can order from Aliexpress for like ten bucks, and those only need to be wired into your existing opener, so install consists of an hours's worth of fiddling with wires.
newguytony
Ekyro smart garage door opener on Amazon. $30 and no subscription. 15 minutes to install.
show comments
ceocoder
I use cheap z-wave tilt detection sensors with home assistant to keep track of garage door state. After 10 minutes there is an Audible reminder that “Garage Door is Open” and the light behind my tv turns bright red. It is simple and works beautifully.
ww520
For an older opener that has a button on the wall, consider installing a fingerbot or switchbot next to the button to physically push it. These can be controlled remotely.
fourneau
I went through this exact pipeline last year.
Chamberlain used to have a HomeBridge, that connected to HomeKit, device that would sit in your garage and sit on your wifi network. It would pair with the opener similar to how a normal wall-mounted garage door panel would. Not only was this setup a little clunky, it was slow. The Siri -> Door open process would often take 5-10 seconds. This wasn't great, but it worked. Sort of.
Then, they did two things that made my blood boil: they discontinued support for it and prevented you from repairing the device with their myQ app, then started using notification for ads.
When I was about to sink an unhealthy amount of time into a garage door opener, ratgdo came in and rescued me. Not only was it simple to install but it was lightning fast. On the same network, it started opening and closing the door the second the Siri command went off. I can only assume that the previous system used to do roundtrips to Chamberlain and the connection wasn't the fastest in the garage.
Ratgdo man, if you read this you have my thanks (and my money, obviously.)
YackerLose
For every blogger who designs their own way around this, there are somewhere between 1000 and 10,000 users who just put up with it
alexfromapex
They sent me a new control board in the mail anyways because I couldn’t get the old homeowners’ info to dissociate with my door opener in the MyQ app
chung8123
I use Inovelli switches in my house as indicators of status. Red Flashing doors unlocked, faster red flashing garage door open, etc. I like not having to use my phone to find notifications. The light that would go on when the door was up made me think of this.
herf
I pulled out the "free" MyQ stuff years ago and replaced with the "timer" Chamberlain controller that closes the garage door after an interval. But I don't recommend it - this hardware is bad: when the capacitor fails after 4 years, it opens the garage door and stays open (even the updated model failed after a few years). This company is on the wrong track.
cdurth
I interfaced an ESP directly with the garage door button and a limit switch, connected and controlled with a Telegram bot. Been working great for years and cost me about $5.
philips
I have used https://konnected.io with my newish Chamberlin. It works great with HomeAssistant and bridging it into Apple Home.
polyterative
As far as I know, it is not allowed on Android to send advertisements in notifications. Not even in a dedicated channel. But Amazon does it no problem. And plenty others. Very tired
hn_submit
The sad part is most users won't have the ability or skill to replace the garage door controller and software like you did. That's what the manufacturer's counting on thereby making it still worthwhile for them to flood them with spam.
And if everyone's doing it what choice do you have? If someone actually starts selling these devices there's a good chance the manufacturer will sue for patent infringement, DCMA reverse engineering or some other guff.
luisgvv
As much as you hate to see this, we need regulation around this
amluto
Interestingly, I have a commercial device from Chamberlain that’s the opposite: it doesn’t work with ratgdo or even Chamberlain’s MyQ crap. The only way to control it is with a Security 2.0 remote (or whatever it’s called) or plain dry contacts. And it gives an ample selection of dry contact control and status terminals.
I assume this is because commercial users have control stations that use dry contacts, and the modern crap is simply a nonstarter.
doawoo
Best thing I did when I got our new place was get a Z-Wave relay module (any smart relay will do) and wired it up exactly like a push button on the opener, just a quick button press in Home Assistant to flip the relay on/off in a cycle making the door open or close. Cheap, easy, entirely offline :)
sc970
I just installed a Shelly 1 Gen 3 relay inbetween the garage door opener and the button. Now controlled via homeassistant, or shelly button on my keyring.
Although it only triggers the button. So no information on whether it is opened or closed.
I'm keeping it simple now, HomeKit or bust for the smart home.
seshagiric
I am surprised no one mentioned the even bigger scam Amazon is perpetuating. After setting up MyQ device, you'd be "delighted" that it automatically appears in your Amazon account. To further delight the customers, Amazon drivers can open your garage using MyQ and "securely" place a package in the garage, close it and leave.
I unplugged my myQ garage door opener and just manually open it, the spam was so bad. Whatever, I will walk into the house, open the door, and pull in, and close it, to not deal with it. Also, I've become paranoid about hacks lately and once a hack can manually unlatch the lever and get inside, I'm cooked anyways.
I have LG washtower thinQ enabled, and the phone app was maybe worse than the garage door opener app. But, at least, the app can be deleted, and the data endpoints are still emitting sensor data enough for home assistant to pick it up. No spam because no app. I get an email when the washer/dryer finishes, I know to plop wet clothes into the dryer, and that works great. That's a good experience. Getting phone ads for soap at 2am is not a good experience.
show comments
otter-in-a-suit
Blink, the AMZN owned WiFi cameras (which, credit where credit is due, have been running flawlessly without a subscription for 5+ years for me), recently started sending me emails for "troubleshooting" a camera that's down. The "troubleshooting" is replacing the batteries. It comes with an ad to buy a specific brand of lithium batteries. On Amazon. They haven't had the audacity to send a push notification for this yet.
I have a zero tolerance policy for spam - notification permissions get taken away on the first offense, emails get marked as spam. I've had the ratgdo on eternal to-do list for a while, so this post speaks to me.
wayeq
Interesting to think of the garage door innovation timeline.
We went from:
"gee, it sure would be nice if I didn't have to get out of my car and lug this heavy door open with my bare hands"
to:
"we can use the garage doors to advertise unrelated products to the owner, and/or participate in massive bot nets to ruin other people's lives!"
gimlichgu
The unsurprising outcome of building your home out of ... proprietary software ? Wait why would you actually do this?
dllu
I use my Tesla Model S as a garage door opener. It has Homelink and I can trigger it from the Tesla app. Most expensive garage door opener ever.
anticorporate
I have had a MyQ-enabled garage door opener for about a month now. I wanted a dumb one, but the installer company who replaced the garage door didn't offer one. Instead, it's just sitting there, denied Bluetooth and WiFi access until I get around to hooking up the z-wave dry contact relay controller (or perhaps ratgo, but I already have a spare relay sitting around).
A few weeks ago, I noticed my Apollo-1 Air quality sensor was seeing some strange behavior in the basement. Home Assistant showed an unexplained temperature spike and humidity drop a little before 1am.
I managed to figure out from other sensors that nothing was actually awry (no spikes in draw of nearby devices, no telltale gas signatures of the water heater kicking on, no motion or CO2 indicating human or other large animal presence). Was the board malfunctioning? Fortunately the device has an internal temperature sensor and an ambient sensor which are separate. Logging confirms the temperature spike originated on the board, probably from the WiFi chip.
But, why?
It turns out, after inspecting the signal a bit more, than the MyQ was broadcasting so loudly between the WiFi and BLE, screaming for someone to talk to it, that my air sensor was having to increase its power to still be able to communicate over all the noise. Switching to a different channel for the crappy old downstairs AP fixed it, but still, c'mon!
I'm a little wary of connecting any sort of ingress/egress to my home to the network at all, even locally, but an honest appraisal of the basement is that smashing a window is probably a much bigger threat model than hacking the door opener. Or in other words, https://xkcd.com/538/
show comments
jfengel
Ah, spam from a garage door app.
On Quora there has been a slew of spammers trying to sell garage door openers. It's probably just a scam, but it seems a pretty niche scam.
harrisonpage
In which I bypass myQ for an open source solution
show comments
jawns
I have myQ also, but solved this problem in a different way.
I use NextDNS, which allows me to block ads (including a lot of mobile ads) at the DNS level.
I disabled all notifications for myQ.
And I configured the garage door to auto-close at 9pm.
show comments
asveikau
A few months ago I read that Security 3.0 breaks ratgdo, and that maybe the wired buttons aren't using the wires for anything but power, they open the door through encrypted Bluetooth.
The way around it is to solder onto the contacts of their proprietary buttons.
Anyone have updates on that situation?
mdarens
this echoes my own frustrations with the user hostility of chamberlain/myq. an added bonus is that in the app they force you to use to control the door instead of integrating with home automation standards, the video banner ads will force whatever audio you might have playing on your device to pause. they're testing the limits of hanlon's razor over there.
i've been meaning set up a dedicated domain/website just to collect complaints about this company's behavior, alternatives, workarounds for their failures like the one posted here recently [1], and importantly, laws. we need laws.
mentioned already in these comments: granular control over notifications between marketing & functional, and no circumvention by intermingling the two.
home automation devices may be allowed to traverse wans to offer remote control for non-vpn/sd-wan users, but should not have their core functionality _or_ initial setup depend on an internet connection.
finally, locked devices produced by companies over a some market cap or another and their subsidiaries should be required to offer a bootloader for user/open firmware after some reasonable period of time to mitigate some of the mountains of ewaste we are producing with this stuff.
Even Apple themselves participates in the push notification advertising these days. For me it's the quickest way to get your app's notifications disabled.
For the OP, do you really need to fire off expletive-laden rants at these people? Why harbor such hatred in your heart and words when you could just say, "Here's what bugged me, and how I fixed it. Now I don't need your product." That's all you need to say.
lostlogin
> I was able to rebuild Dad's solution in software with Slack
This hack could be monetised at this step, by allowing adverts at this step. This would complete the (tech) circle of life nicely.
corndoge
It's a cool solution. It's too bad they don't care and according to market dynamics shouldn't care. One user opted out. You lost time to building your own solution and they lost nothing. Many such cases.
show comments
jsisto
Using the eufy app I am constantly frustrated by things like this. I don't get notifications but when I try to use my robo vac outside of its schedule I am bombarded with ads that are hard not to click and then I have to exit the app and restart.
bob1029
There are some appliances that simply don't make sense to grant IP addresses and network connectivity. The moment your magical home server takes a lightning strike you are back in the stone ages, potentially significantly worse off than someone who just had a bunch of dumb shit in their house.
I don't know why we approach everything like this as a challenge. Certainly, we can make this work. Technically there's nothing stopping us from integrating anything with anything else. But, what is the cost of maintaining this? How many others in your household are into your hobby as much as you are?
show comments
jareklupinski
> I continued using it because I trusted that notifications were meaningful...until recently (October 2026)
it should be illegal for someone who had a good idea once to be allowed to leave that good idea in the hands of others
TazeTSchnitzel
OP, if you're reading this, I love the Nessie in the corner.
1970-01-01
Dad's mercury switch was a better design. This is introducing a massive attack surface.
show comments
etatester
I'm really, incredibly disappointed that Apple (or Google for that matter) doesn't enforce some sort of CANSPAM on notifications.
I need your business notifications, I do not need or approve of your advertising/product updates.
For my mobile OS, all notifications look the same. "AI priority" is the only attempt at this but I don't need AI priority if I have a very tight-knit circle of apps that can send notifications.
Then one important app sends me spam and I turn it off immediately.
show comments
throwitaway222
Glad to have seen this since I will be looking at garage door openers soon.
nikanj
I can just picture the meetings inside the companies, where engineering is trying to explain that abusing notifications for marketing will anger people, and management walking all over those objections
ricardo81
Had a similar experience with a niche phone made in the UK from Wileyfox. After they entered administration all the app updates contained some funky 'add ons'
switchbak
If you're lucky, you'll have an older garage door opener - and they're controlled by simple switches (normally open). You can drive that with buttons, relays, wifi/bluetooth/zigbee/whatever. You can even use access control panels that suck less and aren't as insecure as what the manufacturer offers (hopefully).
Be sure to turn off/disable their old school RF stuff too.
Not surprising that they're pulling a John Deer and making simple things proprietary so they can enshitify you into their ecosystem.
elbistec24
Am I missing something here? Why not just disable marketing notifications instead?
show comments
traviswingo
Whenever I see something like this, it reminds me of how frustrated I am with the majority of people for not only accepting this, but falling for it.
The reason ads come at us from every fucking angle of life is because they work. That’s unacceptable, imo.
They don’t work on me, they don’t work on you, so who the fuck do they work on?
The answer: most people. And that’s why they keep showing them.
All of the anti-patterns we all hate only perpetuate because they work.
We really need to figure out a way to educate people better so that these practices stop working. And I’ve no clue how to do that (tried with my parents, failed miserably in a cloud of “this is too confusing I don’t care.”)
bluedino
Home automation was better off with X10
Uses your existing wiring, etc.
show comments
howunfortunate
Normies are just not that offended by ads
yakshaving_jgt
Ah, this is so cool.
When I eventually buy a house with my own garage, I'm totally adding the garage door to Apple Home so that I can operate it with my voice while inside my helmet on my motorcycle, and not have to take my gloves off and get the remote control out. I hadn't thought of that possibility.
show comments
tonymet
I love this solution, and would encourage being very careful when sending wireless garage operations .
Wired and wireless layer 2 protocols have retransmission and your layer 7 app can receive duplicate commands. Be sure to add deduplication logic to the command e.g. using a nonce or transaction id. You have to be very careful that your layer 7 app doesn’t play the “open” command twice and close the door.
I’d happily buy your product to replace my MyQ. I hate the spam, and it’s just plain buggy. Plus the base station runs loads of unwanted services. I haven’t fully audited it, but I’m sure it’s a security nightmare.
JumpCrisscross
Tailwind is also great.
SoftTalker
At the end of the day the opener is a motor and a couple of limit switches on the door track. Should be easy to totally bypass whatever "smarts" it ships with, using an arduino or something.
show comments
nticompass
I have a Chamberlain/myQ garage door opener, but I do not own the house (it's a townhouse I am renting). This probably limits my ability to install/use Ratgdo.
I also hate the amount of ads the myQ app has, like it's pretty much nothing but ads (and reporting this to the Play Store does nothing).
Currently, my garage door opener is connected to my WiFi (on its own "IoT VLAN") because I once had to use myQ to open my garage whilst away to let my friend into the house.
Normally, I just use a "normal" garage door opener remote (and my car's built-in HomeLink buttons).
Scene_Cast2
Out of curiosity, how's the device doing on FCC certification?
Using a pre-certified module doesn't let you bypass certification.
dkobia
Thank you for writing this and for that last sentence - "To anyone at Chamberlain responsible for myQ...". The MyQ spam is atrocious and the repeated attempts to rent seek for what is a basic feature have been grinding on me for a few years now.
jjtheblunt
That’s cool and i loathe the myQ ads too. No idea what idiotic marketing decision drove them, as i eagerly search regularly for alternative lifters. Like is Chamberlain the only game in Oz and Europe like in the US?
show comments
classified
As long as they're not targeting your garage door AI, persuading it to autonomously buy all those shiny garage-door-enhancing products...
htrp
this is just the rokufication (enshittification of smart TVS) expanded to all physical devices.
sell it as a loss leader and make the money up on ads / revenue. Once you install something (physically), it's almost not worth it to uninstall it. Expect this with all "smart" iot devices
A MyQ costs 50$ (sometimes down to 19.99 on sale), there's a reason for that.
The Chaimberlain / MyQ situation is terrible. I strongly recommend avoiding them all together.
I recently installed a Chaimberlain garage door opener in a location that required three buttons inside the garage. They limit the buttons in software, so that each garage door opener can have only two at any given time!
After some tinkering, I discovered that the Chaimberlain buttons transmit their signal wirelessly these days, even when "wired" to the garage door opener... the wires only provide power. So...
I worked around the problem by placing a dab of solder on one of their security+ 3.0 buttons so that it is always "pressed." Then I wired up the three old school garage door momentary switches to send power to it. When pressed, they power up the Chaimberlain button, which then sends a wireless signal to open the door.
The Apple App Store Review Guidelines 4.5.4 [1] have this to say:
> Push Notifications must not be required for the app to function, and should not be used to send sensitive personal or confidential information. Push Notifications should not be used for promotions or direct marketing purposes unless customers have explicitly opted in to receive them via consent language displayed in your app’s UI, and you provide a method in your app for a user to opt out from receiving such messages. Abuse of these services may result in revocation of your privileges.
I am frustrated that Apple isn't using their gatekeeping powers for good. I wonder if users can file a complaint.
[1] https://developer.apple.com/app-store/review/guidelines/#des...
Edit: yes, users can file complaints. If you are an Apple Developer, you can do so via https://developer.apple.com/help/app-review/safe-and-trusted...
You can also follow "Report A Problem" link at the bottom of the App Store's page for the app.
Apps for devices that I purchased that show ads is probably one of my biggeset tech pet peeves.
I will sell/replace/throw every device if I see a ad in the ecosystem. Almost every IOT manufacturer does this crap so it gets more difficult. Moving the device to Home Assistant helps a little.
Ecobee you're next, and I hope you go down in flames having such crap software.
It’s super cool this person did this but even with AI, it’s a super power a normal user can’t pull off.
The notification marketing spam is really bad right now. I can literally turn off every marketing toggle in the Uber app (buried as it is), save it, then swipe out of those settings, then back in, and the notifications are all enabled again. Same goes for a lot of other apps, like the Dominos pizza app.
It’s gotten to the point where I just install the app, use it to order a pizza or a ride, the. uninstall the offending app (though sometimes I still get ghost notifications!)
But for apps like those for garage doors, that’s not a viable strategy.
I know why these notifications happen. The open rate ranges from 5-20% (though up to half of these can be accidental, but at least you got them back into the app, right).
But it really feels like an intrusion on the iOS and Android in ways that can compromise usage of the phone. It seems like at least Apple used to care about this and maintain UX standards but it seems like that has gone out the window.
For people who can’t jury rig a solution to their garage door opener, what can they do?
Philips (Signify) Hue is also horrible. You open the app, want to switch on a lamp, bam "Buy these new lamps for only 250 eur". Or "You need an account", which I don't need btw, everything I paid for works thank you. When I first started I just saw my rooms listed, now the top 2 tiles are "You need an account for "protection"" and then another one "Hue Secure: Help secure your house!". You can't remove these, you have to scroll down (more) to reach the intended goal for opening the app. w.t.f. Do you know how much I have paid them already?
I am of the persuasion that a smart home should never require whipping out your phone, but I have not been able to brush away all occurrences yet. But the Hue app always motivates me to either do things via Home Assistant (including just coupling the bulb directly using ZigBee) or get a switch ASAP.
Yes Signify (former Philips), you got an ad in my face, congrats, but you also got me super annoyed and I'll be on the lookout for alternatives.
One of the the ecosystem providers (Apply/Google/Amazon) should differentiate themselves by offering a certification level for their ecosystem that an IoT device:
- does not have a subscription fee
- does not sell data
- does not have ads or remarket
- follows basic cyber security hygiene
- is simple to set up (thinking of my parents)
- interacts purely through standard protocols
I have long delayed wiring my home with IoT devices, but would be interested in doing so if I could have some basic assurances about the experience of using it being pleasant and safe. Almost everybody that I know who has invested heavily in IoT has had to treat it like a side project to avoid the various pitfalls.
Chalk me up to another happy user of Ratgdo. I got one of the older ESP8266-based ones whose Homekit firmware has been in "maintenance mode" by the developer due to its board having limited RAM and processing power to do the things they're doing with the current boards. That was a bummer to find out since I'd had the thing for less than a year and I was using the "dry contact" system: manually wired magnetic switches on the door to tell the board whether the door is up, down, or in a state between (opening or closing). It's a very, very old garage door opener.
Since the code was put in a "best-effort basis" for future updates, it's gone from version 2.2 to 2.2.6 with numerous fixes. Most notable was software-configurable "debounce" functionality which finally solved my problem with the door tripping the magnetic reed switches several times quickly when the door comes to a stop and confusing the board about its current up/down status.
I bring it up because I have tremendous enthusiasm for people who take an idea, a cheap microcontroller, and put together a solution for people who prefer to stick with older, simple appliances but still want some sort of smart functionality. People who "make cool stuff and put it on the internet." That the creator disclosed that he's putting his focus on the newer boards and will maintain/fix issues with the older ones on a "best-effort" and then actually does it... it's fantastic. Because of this continued support and fixes, I can't recommend Ratgdo boards enough.
For those curious, the apparent character-spam "RATGDO" is actually an acronym for Rage Against The Garage Door Opener.
When we rented our house the garage door opener was broken. The landlord sent a guy who was completely incompetent, gave up after five minutes and said we needed to buy a new one. The landlord would pay for it, but I knew that a new one would come with this MyQ scam and also not work with Homelink (car integration) which would be a huge downgrade. So I fixed it myself rather than get a free new one.
Someone should start a business ripping this crap out of garage door openers and replacing it with something sensible.
Chamberlain made a new protocol that breaks the ability to do this with their new openers. They’ll get away with it too because there’s not many options for garage door openers and most people just buy whatever the contractor installs
Feit Electric and Arlo have also started pushing ads, probably within the past few months. Before there were zero ads... for years.
Technically it is against app store review guidelines to use push notifications for ads, unless the user has specifically opted in. I'm guessing it's difficult to catch during app review, or reviewers don't care.
> 4.5.4 Push Notifications must not be required for the app to function, and should not be used to send sensitive personal or confidential information. Push Notifications should not be used for promotions or direct marketing purposes unless customers have explicitly opted in to receive them via consent language displayed in your app’s UI, and you provide a method in your app for a user to opt out from receiving such messages. Abuse of these services may result in revocation of your privileges.
https://developer.apple.com/app-store/review/guidelines/#:~:...
There is definitely no way to opt-in our opt-out in Feit or Arlo. My guess is the same with all these other apps.
If you want something more plug-and-play than the Ratgo, Tailwind is ~$120 and integrates with Google Home / Alexa.
I bought a house that came with a Chamberlain garage door opener. At $20 I figured I would try the MyQ device to see if it's as bad as people say. It is that bad.
I bought the Tailwind device and it is exactly what I wanted. I can tell Google to open/close the door. My only complaint is that Google makes me tell it a code to open, but you can put it in one voice prompt "hey google open the garage door with code NNNN".
I used a 10 dollar sonoff wifi relay, soldered a zener to it to power it from 5V and cut the Live tracé so it can be used as a dry contact relay.
It just need to give a short pulse to start and open/close the door.
And to read out the door state I added a LDR circuit on the GPIO that is attached to the motor LED.
Has been working very well last three years using HA. no need for any of that expensive cloud connected hardware.
I love my 25 year old, completely dumb garage door opener. We have a button in the cars and a keypad on the outside. Plus, it’s so loud that if it were to ever open during the middle of the night, it’s a wonderful security alarm.
I had a chip on my shoulder with something similar recently - using the Nanoleaf app to pair and control my "holiday string lights". I worked with Astra for a bit and got a script working to pair it to my Home Assistant entirely from my computer. No nanoleaf app, no apple Home app. And now I can also program it entirely from Home Assistant, too. As far as I can tell this didn't previously exist as an option for these.
https://github.com/brynnb/nanoleaf-holiday-local
I never (and would never) hook up myQ to my network, even my IOT VLAN. Immediately upon getting new garage door motors I installed ratgdo devices and monitor it via HomeAssistant and do get push notifications to my phone if a garage door is opened between certain times. Works perfectly… HOWEVER, this didn’t prevent me from buying Chamberlain garage door motor and thus they likely don’t give a crap and won’t stop making horrifically stupid hostile consumer decisions. There really aren’t any good options (atleast in USA).
I love that ratgdo stands for "rage against the garage door opener". I bought a pair for my own garage because I wanted home assistant integration and the native garage door app disallowed that. I feel like an element of spite is in there as well. I've already paid for the machine, if you hamstring my use of it I will do what I can to cut you out of my life.
We need to expand the CAN SPAM act to cover app notifications. Really for something like a garage door opener there should be class-action lawsuit options getting injunctions against this sort of behavior. Even including ads in the app seems inappropriate.
Of course the flipside is that if your thing depends on an app you need ongoing maintenance, but if you've got an advertising-riddled app spamming notifications it seems like the prophylactic is indistinguishable from the disease it prevents.
We say this about many things in tech, but IoT really seems like an area that's long overdue for some kind of open protocol standardization. The device makers can build their services on top of it and run whatever business model they want, but they should at least be forced to give us an escape hatch.
It wouldn't bother me one bit if apple/google banned advertisements in notifications period.
Pro Tip: you don’t need to buy one of the very expensive official ratgdo devices, if you are adventurous and can solder. The software is free and for a few bucks and a little time in KiCad you can build yourself a PCB, solder on the ESP32 and some electronics, and you’re off and running.
I want to feed all my notifications through a jev like model with a prompt I control to determine if they are shown or not. Not rely on the out developer to behave, just filter if spam then ignore.
There's a term for this. It's called "enshittification," and it's a cancer on our technological society.
I've never understood how technologists, product managers, and marketing people can sit in the same conference room and collectively decide, "Hey, let's start sending unsolicited marketing push notifications to our users, and while we're at it, we can make another $1,000 a month by stuffing Google Ads into the app."
And then everyone around the table nods their heads and says, "Great idea, let's do it!"
If I were in that room, I'd be throwing chairs. I'd be so vehemently opposed to this kind of garbage that the meeting would come to a screeching halt.
I genuinely cannot comprehend the decision-making process that leads an entire room of supposedly intelligent people to agree that deliberately degrading the user experience for a few extra dollars is a good business decision. These are not freemium products - these customers paid for these products!!
I have the dreaded MyQ because my new Honda didn't come with Homelink buttons and they make you tie into MyQ to access the opener via CarPlay. If any of this has a CarPlay solution, I'm in.
I went with a Meross MSG100hk garage door interface. It works with HomeKit and I added a HomeKit automation to turn a light on/off based on door open status.
Its weird manufacturers even try this - I'd bet a significant amount of money that this fancy garage door opener was marketed as a premium solution - and you couldn't just replace the motor and endstop sensors, you had to replace everything.
Meanwhile there are Zigbee solutions you can order from Aliexpress for like ten bucks, and those only need to be wired into your existing opener, so install consists of an hours's worth of fiddling with wires.
Ekyro smart garage door opener on Amazon. $30 and no subscription. 15 minutes to install.
I use cheap z-wave tilt detection sensors with home assistant to keep track of garage door state. After 10 minutes there is an Audible reminder that “Garage Door is Open” and the light behind my tv turns bright red. It is simple and works beautifully.
For an older opener that has a button on the wall, consider installing a fingerbot or switchbot next to the button to physically push it. These can be controlled remotely.
I went through this exact pipeline last year.
Chamberlain used to have a HomeBridge, that connected to HomeKit, device that would sit in your garage and sit on your wifi network. It would pair with the opener similar to how a normal wall-mounted garage door panel would. Not only was this setup a little clunky, it was slow. The Siri -> Door open process would often take 5-10 seconds. This wasn't great, but it worked. Sort of.
Then, they did two things that made my blood boil: they discontinued support for it and prevented you from repairing the device with their myQ app, then started using notification for ads.
When I was about to sink an unhealthy amount of time into a garage door opener, ratgdo came in and rescued me. Not only was it simple to install but it was lightning fast. On the same network, it started opening and closing the door the second the Siri command went off. I can only assume that the previous system used to do roundtrips to Chamberlain and the connection wasn't the fastest in the garage.
Ratgdo man, if you read this you have my thanks (and my money, obviously.)
For every blogger who designs their own way around this, there are somewhere between 1000 and 10,000 users who just put up with it
They sent me a new control board in the mail anyways because I couldn’t get the old homeowners’ info to dissociate with my door opener in the MyQ app
I use Inovelli switches in my house as indicators of status. Red Flashing doors unlocked, faster red flashing garage door open, etc. I like not having to use my phone to find notifications. The light that would go on when the door was up made me think of this.
I pulled out the "free" MyQ stuff years ago and replaced with the "timer" Chamberlain controller that closes the garage door after an interval. But I don't recommend it - this hardware is bad: when the capacitor fails after 4 years, it opens the garage door and stays open (even the updated model failed after a few years). This company is on the wrong track.
I interfaced an ESP directly with the garage door button and a limit switch, connected and controlled with a Telegram bot. Been working great for years and cost me about $5.
I have used https://konnected.io with my newish Chamberlin. It works great with HomeAssistant and bridging it into Apple Home.
As far as I know, it is not allowed on Android to send advertisements in notifications. Not even in a dedicated channel. But Amazon does it no problem. And plenty others. Very tired
The sad part is most users won't have the ability or skill to replace the garage door controller and software like you did. That's what the manufacturer's counting on thereby making it still worthwhile for them to flood them with spam.
And if everyone's doing it what choice do you have? If someone actually starts selling these devices there's a good chance the manufacturer will sue for patent infringement, DCMA reverse engineering or some other guff.
As much as you hate to see this, we need regulation around this
Interestingly, I have a commercial device from Chamberlain that’s the opposite: it doesn’t work with ratgdo or even Chamberlain’s MyQ crap. The only way to control it is with a Security 2.0 remote (or whatever it’s called) or plain dry contacts. And it gives an ample selection of dry contact control and status terminals.
I assume this is because commercial users have control stations that use dry contacts, and the modern crap is simply a nonstarter.
Best thing I did when I got our new place was get a Z-Wave relay module (any smart relay will do) and wired it up exactly like a push button on the opener, just a quick button press in Home Assistant to flip the relay on/off in a cycle making the door open or close. Cheap, easy, entirely offline :)
I just installed a Shelly 1 Gen 3 relay inbetween the garage door opener and the button. Now controlled via homeassistant, or shelly button on my keyring.
Although it only triggers the button. So no information on whether it is opened or closed.
I am also a happy user of RATGDO thanks to Genie royally screwing up an update to their Aladdin Connect software: https://github.com/home-assistant/core/issues/181420
I'm keeping it simple now, HomeKit or bust for the smart home.
I am surprised no one mentioned the even bigger scam Amazon is perpetuating. After setting up MyQ device, you'd be "delighted" that it automatically appears in your Amazon account. To further delight the customers, Amazon drivers can open your garage using MyQ and "securely" place a package in the garage, close it and leave.
You see when you install MyQ, by default it opts you in for in-garage delivery. And here's the beauty, you also need a PHD to figure out how to disable the setting in Amazon. (reference: https://support.chamberlaingroup.com/s/article/myQ-and-Amazo...)
I unplugged my myQ garage door opener and just manually open it, the spam was so bad. Whatever, I will walk into the house, open the door, and pull in, and close it, to not deal with it. Also, I've become paranoid about hacks lately and once a hack can manually unlatch the lever and get inside, I'm cooked anyways.
I have LG washtower thinQ enabled, and the phone app was maybe worse than the garage door opener app. But, at least, the app can be deleted, and the data endpoints are still emitting sensor data enough for home assistant to pick it up. No spam because no app. I get an email when the washer/dryer finishes, I know to plop wet clothes into the dryer, and that works great. That's a good experience. Getting phone ads for soap at 2am is not a good experience.
Blink, the AMZN owned WiFi cameras (which, credit where credit is due, have been running flawlessly without a subscription for 5+ years for me), recently started sending me emails for "troubleshooting" a camera that's down. The "troubleshooting" is replacing the batteries. It comes with an ad to buy a specific brand of lithium batteries. On Amazon. They haven't had the audacity to send a push notification for this yet.
I have a zero tolerance policy for spam - notification permissions get taken away on the first offense, emails get marked as spam. I've had the ratgdo on eternal to-do list for a while, so this post speaks to me.
Interesting to think of the garage door innovation timeline.
We went from:
"gee, it sure would be nice if I didn't have to get out of my car and lug this heavy door open with my bare hands"
to:
"we can use the garage doors to advertise unrelated products to the owner, and/or participate in massive bot nets to ruin other people's lives!"
The unsurprising outcome of building your home out of ... proprietary software ? Wait why would you actually do this?
I use my Tesla Model S as a garage door opener. It has Homelink and I can trigger it from the Tesla app. Most expensive garage door opener ever.
I have had a MyQ-enabled garage door opener for about a month now. I wanted a dumb one, but the installer company who replaced the garage door didn't offer one. Instead, it's just sitting there, denied Bluetooth and WiFi access until I get around to hooking up the z-wave dry contact relay controller (or perhaps ratgo, but I already have a spare relay sitting around).
A few weeks ago, I noticed my Apollo-1 Air quality sensor was seeing some strange behavior in the basement. Home Assistant showed an unexplained temperature spike and humidity drop a little before 1am.
I managed to figure out from other sensors that nothing was actually awry (no spikes in draw of nearby devices, no telltale gas signatures of the water heater kicking on, no motion or CO2 indicating human or other large animal presence). Was the board malfunctioning? Fortunately the device has an internal temperature sensor and an ambient sensor which are separate. Logging confirms the temperature spike originated on the board, probably from the WiFi chip.
But, why?
It turns out, after inspecting the signal a bit more, than the MyQ was broadcasting so loudly between the WiFi and BLE, screaming for someone to talk to it, that my air sensor was having to increase its power to still be able to communicate over all the noise. Switching to a different channel for the crappy old downstairs AP fixed it, but still, c'mon!
I'm a little wary of connecting any sort of ingress/egress to my home to the network at all, even locally, but an honest appraisal of the basement is that smashing a window is probably a much bigger threat model than hacking the door opener. Or in other words, https://xkcd.com/538/
Ah, spam from a garage door app.
On Quora there has been a slew of spammers trying to sell garage door openers. It's probably just a scam, but it seems a pretty niche scam.
In which I bypass myQ for an open source solution
I have myQ also, but solved this problem in a different way.
I use NextDNS, which allows me to block ads (including a lot of mobile ads) at the DNS level.
I disabled all notifications for myQ.
And I configured the garage door to auto-close at 9pm.
A few months ago I read that Security 3.0 breaks ratgdo, and that maybe the wired buttons aren't using the wires for anything but power, they open the door through encrypted Bluetooth.
The way around it is to solder onto the contacts of their proprietary buttons.
Anyone have updates on that situation?
this echoes my own frustrations with the user hostility of chamberlain/myq. an added bonus is that in the app they force you to use to control the door instead of integrating with home automation standards, the video banner ads will force whatever audio you might have playing on your device to pause. they're testing the limits of hanlon's razor over there.
i've been meaning set up a dedicated domain/website just to collect complaints about this company's behavior, alternatives, workarounds for their failures like the one posted here recently [1], and importantly, laws. we need laws.
mentioned already in these comments: granular control over notifications between marketing & functional, and no circumvention by intermingling the two. home automation devices may be allowed to traverse wans to offer remote control for non-vpn/sd-wan users, but should not have their core functionality _or_ initial setup depend on an internet connection.
finally, locked devices produced by companies over a some market cap or another and their subsidiaries should be required to offer a bootloader for user/open firmware after some reasonable period of time to mitigate some of the mountains of ewaste we are producing with this stuff.
1. https://news.ycombinator.com/item?id=50525260
Even Apple themselves participates in the push notification advertising these days. For me it's the quickest way to get your app's notifications disabled.
For the OP, do you really need to fire off expletive-laden rants at these people? Why harbor such hatred in your heart and words when you could just say, "Here's what bugged me, and how I fixed it. Now I don't need your product." That's all you need to say.
> I was able to rebuild Dad's solution in software with Slack
This hack could be monetised at this step, by allowing adverts at this step. This would complete the (tech) circle of life nicely.
It's a cool solution. It's too bad they don't care and according to market dynamics shouldn't care. One user opted out. You lost time to building your own solution and they lost nothing. Many such cases.
Using the eufy app I am constantly frustrated by things like this. I don't get notifications but when I try to use my robo vac outside of its schedule I am bombarded with ads that are hard not to click and then I have to exit the app and restart.
There are some appliances that simply don't make sense to grant IP addresses and network connectivity. The moment your magical home server takes a lightning strike you are back in the stone ages, potentially significantly worse off than someone who just had a bunch of dumb shit in their house.
I don't know why we approach everything like this as a challenge. Certainly, we can make this work. Technically there's nothing stopping us from integrating anything with anything else. But, what is the cost of maintaining this? How many others in your household are into your hobby as much as you are?
> I continued using it because I trusted that notifications were meaningful...until recently (October 2026)
it should be illegal for someone who had a good idea once to be allowed to leave that good idea in the hands of others
OP, if you're reading this, I love the Nessie in the corner.
Dad's mercury switch was a better design. This is introducing a massive attack surface.
I'm really, incredibly disappointed that Apple (or Google for that matter) doesn't enforce some sort of CANSPAM on notifications.
I need your business notifications, I do not need or approve of your advertising/product updates.
For my mobile OS, all notifications look the same. "AI priority" is the only attempt at this but I don't need AI priority if I have a very tight-knit circle of apps that can send notifications.
Then one important app sends me spam and I turn it off immediately.
Glad to have seen this since I will be looking at garage door openers soon.
I can just picture the meetings inside the companies, where engineering is trying to explain that abusing notifications for marketing will anger people, and management walking all over those objections
Had a similar experience with a niche phone made in the UK from Wileyfox. After they entered administration all the app updates contained some funky 'add ons'
If you're lucky, you'll have an older garage door opener - and they're controlled by simple switches (normally open). You can drive that with buttons, relays, wifi/bluetooth/zigbee/whatever. You can even use access control panels that suck less and aren't as insecure as what the manufacturer offers (hopefully).
Be sure to turn off/disable their old school RF stuff too.
Not surprising that they're pulling a John Deer and making simple things proprietary so they can enshitify you into their ecosystem.
Am I missing something here? Why not just disable marketing notifications instead?
Whenever I see something like this, it reminds me of how frustrated I am with the majority of people for not only accepting this, but falling for it.
The reason ads come at us from every fucking angle of life is because they work. That’s unacceptable, imo.
They don’t work on me, they don’t work on you, so who the fuck do they work on?
The answer: most people. And that’s why they keep showing them.
All of the anti-patterns we all hate only perpetuate because they work.
We really need to figure out a way to educate people better so that these practices stop working. And I’ve no clue how to do that (tried with my parents, failed miserably in a cloud of “this is too confusing I don’t care.”)
Home automation was better off with X10
Uses your existing wiring, etc.
Normies are just not that offended by ads
Ah, this is so cool.
When I eventually buy a house with my own garage, I'm totally adding the garage door to Apple Home so that I can operate it with my voice while inside my helmet on my motorcycle, and not have to take my gloves off and get the remote control out. I hadn't thought of that possibility.
I love this solution, and would encourage being very careful when sending wireless garage operations .
Wired and wireless layer 2 protocols have retransmission and your layer 7 app can receive duplicate commands. Be sure to add deduplication logic to the command e.g. using a nonce or transaction id. You have to be very careful that your layer 7 app doesn’t play the “open” command twice and close the door.
I’d happily buy your product to replace my MyQ. I hate the spam, and it’s just plain buggy. Plus the base station runs loads of unwanted services. I haven’t fully audited it, but I’m sure it’s a security nightmare.
Tailwind is also great.
At the end of the day the opener is a motor and a couple of limit switches on the door track. Should be easy to totally bypass whatever "smarts" it ships with, using an arduino or something.
I have a Chamberlain/myQ garage door opener, but I do not own the house (it's a townhouse I am renting). This probably limits my ability to install/use Ratgdo.
I also hate the amount of ads the myQ app has, like it's pretty much nothing but ads (and reporting this to the Play Store does nothing).
Currently, my garage door opener is connected to my WiFi (on its own "IoT VLAN") because I once had to use myQ to open my garage whilst away to let my friend into the house.
Normally, I just use a "normal" garage door opener remote (and my car's built-in HomeLink buttons).
Out of curiosity, how's the device doing on FCC certification?
Using a pre-certified module doesn't let you bypass certification.
Thank you for writing this and for that last sentence - "To anyone at Chamberlain responsible for myQ...". The MyQ spam is atrocious and the repeated attempts to rent seek for what is a basic feature have been grinding on me for a few years now.
That’s cool and i loathe the myQ ads too. No idea what idiotic marketing decision drove them, as i eagerly search regularly for alternative lifters. Like is Chamberlain the only game in Oz and Europe like in the US?
As long as they're not targeting your garage door AI, persuading it to autonomously buy all those shiny garage-door-enhancing products...
this is just the rokufication (enshittification of smart TVS) expanded to all physical devices.
sell it as a loss leader and make the money up on ads / revenue. Once you install something (physically), it's almost not worth it to uninstall it. Expect this with all "smart" iot devices
A MyQ costs 50$ (sometimes down to 19.99 on sale), there's a reason for that.
> I offer my sincerest Fuck You